8000/2133, unsure about timings. My config is 6400CL30 tuned 2133 fclk^^ Interesting.
Igor what RAM config was used for the ES R24 run? I dont see it on the HWinfo screen.
I went over a couple of detailed reviews of Raphael CPUs where it was shown that the effective clocks in ST load like SuperPI for the two best cores reached 5700-5750 MHz at stock and 5850 MHz with +100 PBO boost and a tuned curve, with Fmax 5850 and 5950 respectively. Looks like something is really wrong with the setup where the ST clocks can't exceed 4650Mhz.While my ST only saw a 120->126 score going from jedec 4800 to fast tuned ram, MT sees a much larger gain. I'll run it real quick for reference.
Yes, we'll know for sure, although I was asking why you assumed that the VRM voltage is held at a fixed value, while the telemetry indicated otherwise.The rate at wich the score increase as he increase power, we ll know more once Computerbase do their review since they ll make tests at 45, 65, 88 and 142W like they did for the 7950X.
It runs 5650 in CB 2024 ST. In other singlethreaded workloads, it can 5700 or 5750. FMAX/peak reported frequency when unloaded hits 5850.I went over a couple of detailed reviews of Raphael CPUs where it was shown that the effective clocks in ST load like SuperPI for the top two cores reaches 5700-5750 MHz at stock and 5850 MHz with +100 pbo boost and a tuned curve, with Fmax 5850 and 5950 respectively. I think something is wrong with the setup where the ST clocks can't exceed 4650Mhz
So is it good yet? I've not recovered from the 32% hangover .Nah. I'm no.9 which means that whatever I do, I remain poor while everyone else around me gets rich!
I was off here. the tuned score was from memory. It's actually 2,190.While my ST only saw a 120->126 score going from jedec 4800 to fast tuned ram, MT sees a much larger gain. I'll run it real quick for reference.
4800 JEDEC - 1,950
6400 Tuned - 2,280
It's the best Zen yet at 300WSo is it good yet? I've not recovered from the 32% hangover .
That's very interesting (emphasis mine).The updated design was introduced by Mark Papermaster, AMD's chief technology officer, and he began by pointing out that the changes culminated from its collaboration with Samsung, which licenses AMD's graphics tech for the Exynos range of smartphone and tablet processors.
hahaha, men in black will be round soon
hahaha, men in black will be round soon
It's not safe for him now that he's been outed as one of MLID's super reliable sources.He has not posted for a minute. Wonder if Lisa's goon squad has snatched him already.
Cheese said that both Mire Clark and Mahesh Subramony confirmed that Zen 5 uses N4P.If it’s N4X that’s even better, as it’s meant for extreme performance and no wonder AMD is able clock highly so easily.
One could say N4X is better than N3B for desktop.
Wow. Mr. Moostache is talking about my graph!
Not exactly. Hardwareluxx (Andreas Schilling) wrote "N4P and N4X".
PS:Andreas Schilling said:The new CCD is supposed to be [manufactured in] "TSMC 4nm FinFET" — at the tech day, N4P and N4X have been mentioned specifically.
broQen siliQon, amiriteMLIDs Video today is one of the best ones ever...
You will tell your grandchildren that you were there, 3000 years ago, and witnessed Igors ascension to interwebz fame first hand 😁
Huh, this is actually quite interestingAMD's tweaked RDNA 3.5 GPU is solely focused on improving mobile gaming performance
There are plenty of little changes under the hood to help the graphics processor do more for less power.www.pcgamer.com
That's very interesting (emphasis mine).
Cross pollination of technologies between smartphone and PC!